Manfrotto Aluminum Camera Slider with Ball Head (24")

Rs. 58,520.00
This product is Out of stock
Key Features:
  • Roller-Bearing Sliding System
  • Aluminum Ball Head with Quick Release
  • Slider Load: 22 lb / Head Load: 8.8 lb
  • 24" Total Track Length / 18" Travel
  • Steel Ball Bearings and Polymer Wheels
  • Adjustable Friction System
  • 3/8"-16 and 1/4"-20 Mounting Threads
  • 3/8"-16 Tie-Down Screw
  • Bubble Level

The 24" Aluminum Camera Slider with Ball Head combination from Manfrotto enables you to create smooth tracking shots. Use the head with a camera rig up to 8.8 pounds; the total slider capacity is 22 pounds. Lock the ball head at your chosen angle, or smoothly pan the head as you slide (the single lock does not enable panning while the tilt is fixed). A quick release plate provides quick on/off mounting of your camera. This friction slider features steel ball bearings, an 18" travel distance, and quiet polymer wheels for smooth camera carriage slides.

Manfrotto Camera Slider 60cm (23.6")

The 23.6" Camera Slider from Manfrotto is a sturdy, portable solution for adding short-length tracking shots and subtle motion to your videos with loads up to 22 lb. It features high-precision steel ball bearings and quiet PSU polymer wheels for smooth camera carriage slides and an adjustable friction system to dial in the right amount of resistance for each slide. The carriage has a maximum travel distance of 18.4". The slider is constructed from machined anodized aluminum and weighs 4.83 lb. It can be setup on any flat and level surface or mounted on a tripod via the 1/4"-20 and 3/8"-16 threads at the center and ends of the tripod. The threads also allow you to attach a variety of optional accessories, such as articulating arms and Manfrotto's Digital Director.

Key Features:
  • 18.4" travel distance
  • Machined anodized aluminum construction
  • Steel ball bearings and PSU polymer wheels for smooth and quiet operation
  • Adjustable friction system
  • 1/4"-20 and 3/8"-16 attachment points
  • Leveling bubble
  • Made in Italy
Manfrotto 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate

This 494RC2 Mini Ball Head from Manfrotto features an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. Compatible quick release plate can removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be instantly reattached. The cam lock also features a safety catch to prevent a compatible quick release plate from accidentally disconnecting.

The 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate has a load capacity of 8.8 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. By loosening the 494RC2's locking knob, its ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. An additional knob opposite the locking knob can be rotated to apply tension control to the ball-and-socket joint's movements.

Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the 200PL-14 quick release plate, which measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface.

494RC2 Mini Ball Head
  • 8.8 lb load capacity
  • Compatible with tripods or support systems that feature a 3/8"-16 mount
  • Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
  • Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
  • Dual, ball-and-socket joint notches enable two-sided tilt control
  • Integrated RC2 quick release cam lock
  • Locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
  • Dedicated tension control knob for the ball-and-socket joint's movements
  • Durable, aluminum-alloy construction
200PL-14 Quick Release Plate
  • Compatible with Manfrotto RC2 quick release cam lock
  • Measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface
  • 1/4"-20 mount
  • Durable, aluminum-alloy construction

Technical Specifications:

Head Type

Ball Head

Base Mount

3/8"-16 Thread

Camera Mounting Screw

1/4"-20 Male

Quick Release Plate Type

200PL-14

Friction Control

Yes

Independent Pan Lock

No

Ball Sphere Diameter

1" / 25.40 mm

Lateral Tilt

-90° to +90°

Load Capacity

8.8 lb / 4 kg

Weight

11.29 oz / 320 g

 

In the Box:

Manfrotto Camera Slider 60cm (23.6")
  • Limited 2-Year Warranty
Manfrotto 494RC2 Mini Ball Head with 200PL-14 Quick Release Plate
  • 200PL-14 Quick Release Plate
  • Limited 6-Month Warranty

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)