Made for podcasting, streaming, and gaming, the Focusrite Vocaster Broadcast Kit pairs a Vocaster DM14v XLR microphone with a set of comfortable HP60v headphones to bring studio-quality sound to your show. The XLR microphone is tuned for capturing a rich voice tone that connects with your audience. It features a dynamic capsule and a cardioid pickup pattern designed to give you more of your voice and less of your room noise. The built-in windshield reduces plosives known as "pops" and the internal shockmount ensures rumble-free recording. A yoke mount allows for precise positioning of the mic when mounted on a boom arm. The Vocaster DM14v comes with an XLR cable for connecting to an audio interface or mixer. Conveniently, the dynamic capsule doesn't require a battery or phantom power. Optimized for Podcasting and Streaming The DM14v offers a voice-centered 50 Hz to 16 kHz frequency response, shaving off extreme high frequencies and effectively mitigating unnecessary lows that can muddy up the sound. Clear, Focused Recording The DM14v is an excellent fit for recording in untreated home and project studios without a lot of isolation because the less-sensitive dynamic capsule picks up fewer unwanted sounds and room reflections from further away, and more of the person speaking closely into the mic. Conveniently, the dynamic capsule doesn't require a battery or phantom power. In addition, the cardioid polar pattern focuses audio capture in the area in front of the capsule, picking up less sound from the rear and sides. Block out the World, Stay in the Conversation The HP60v closed-back studio headphones lets you hear your show as the world will. The closed-back design stops the mic from picking up your show mix and cuts unwanted distracting noise. Plush pads keep you comfortable even when recording long sessions. Technical Specification: Form Factor Stand/Boom Mount Element Type Dynamic Polar Pattern Cardioid Frequency Range 50 Hz to 16 kHz Analog Output 1x XLR 3-Pin Male (on Mic) Power Sources No Power Required Primary Applications Broadcast, Podcast, Web-Streaming Form Factor Stand/Boom Mount Intended Sound Sources Vocals, Speech/Voice-Over Sound Field Mono Element Type Dynamic Polar Pattern Cardioid Orientation End Address Circuitry Solid-State Frequency Range 50 Hz to 16 kHz Impedance 200 Ohms at 1 kHz Sensitivity -57 dB Analog Output 1x XLR 3-Pin Male (on Mic) Cable Length 9.8' / 3 m Power Sources No Power Required Mounting Thread Size 5/8"-27 Female (3/8"-16 Female with Included Adapter) Dimensions ø: 2.4 x L: 7.5" / ø: 60 x L: 191 mm Weight 1.4 lb / 655 g In the Box: Focusrite Vocaster Broadcast Kit Dynamic Cardioid XLR Podcasting Microphone with Headphones HP60v Headphones XLR Microphone Cable (9.8') 3/8"-16 Thread Adapter Limited 3-Year Manufacturer Warranty